language
Blade server dust removal
Dust removal inside the host chassis:
First, use a handheld special vacuum cleaner to clean up the dust deposited on the server motherboard and slots. Note: Try not to use cleaning
spray to rinse the motherboard of the small machine.
Dust removal of host power fan:
First use a low-power (800W) vacuum cleaner, and initially use a vacuum cleaner with an anti-static brush to clean the dust on the fan surface.
For dust on the fan blades, use a special online cleaning spray and use a vacuum cleaner to perform secondary treatment.
③Dust removal around the CPU board:
First use an anti-static brush to clean the dust, then use an electrostatic cleaning instrument and an air compressor to remove the remaining
dust, and then use a hand-held vacuum cleaner to clean the dust and residues.
④ Memory board dust removal:
First use an anti-static brush to clean the dust, use an electrostatic cleaning instrument and an air compressor to remove
the remaining dust,
and then use a hand-held vacuum cleaner to clean the dust and residue. Note: Try not to use server spray to clean.
⑤ Dust removal of physical boards:
First, use the electrostatic cleaning instrument and air compressor to remove the remaining dust. Use a hand-held vacuum
cleaner to initially.
clean the dust on the surface of the motherboard, and then use a special anti-static brush to remove stains. Finally, use a wind
blower to remove the remaining dust.
Dust removal around PCI card:
Use an anti-static brush to clean the front and back of the PCI and remove it with a hand-held vacuum cleaner. Use an
electrostatic cleaning.
instrument and an air compressor to remove remaining dust. Note: Try not to use server spray to clean.
⑥ Dust removal around the hard disk basket and the air inlet of the hard disk cage:
First use an anti-static brush to clean the dust, and then use a hand-held vacuum cleaner to remove the remaining dust.
⑦ Dust removal of air inlet on the front panel of the machine:
First, use a hand-held vacuum cleaner to initially clean the front windshield of the server, and then use a special cleaning
spray for the server to
clean each mesh hole. Finally, use anti-static fluid to eliminate the surface of the windshield in front of the server.
Rack-mounted server dust removal
Rack server
Rack DL380p Gen8 internal structure
The HP DL380p Gen8 server chassis adopts a tool-free disassembly design. The chassis cover can be easily removed through the handle of the
chassis top cover. There are 6 hot-swap cooling fans between the DL380p Gen8 processor and the hard disk of the front panel, and a transparent
air guide cover is installed to see the processor and memory slot below. The flow shield is installed behind the cooling fan and the radiator, which
can accelerate the flow of air inside the chassis.
HP DL380p Gen8 server internal structure
It is worth noting that the number of memory slots has been expanded, from the 18 built-in slots of the previous generation to the current 24,
and the processor's cooling seat has also been changed from horizontal to straight.
导流风罩
Clutch buckle on the processor cooling mount
This air guide cover indicates the processor and memory numbers, allowing users to compare the hardware under the
transparent air guide cover and directly check with the information panel and the system information of the iLO 4.
It should be noted that when removing this air guide, you must use both hands to unbutton the buckle on the processor
heat sink to remove it. In addition, despite supporting 24 DIMM memory slots, the diversion hood does not occupy more
space.
With 6 hot-swap fans
The body has 6 heat dissipation fans that support hot-swap. At the same time, each redundant fan can be installed separately, providing a module
design where the entire group of fans can be completely removed through the module bracket. There is a transparent air guide behind the fan,
covering the processor and memory. The main function is to force the cooling air to flow through these hardware components that will emit heat,
further enhancing the heat dissipation effect.
24 extended memory slots
The DL380p Gen8 chassis contains 4 PCIe × 16 slots, and their arrangement is different from the previous ones. It is a group of two front and rear,
divided into two rows and placed on the left and right sides of the motherboard. In each group, the front and rear PCIe slots can share a horizontal
adapter card. On the horizontal adapter card, 1 PCIe × 16 and 2 PCIe × 8 can be connected, and a total of 3 slots with interfaces can be connected.
Light blue marking on the adapter card
To remove the horizontal adapter card with the guide to the smart slot, just rotate the light blue pull handle with your
hand, turn the fixed screws,
then hold the light blue position on the adapter card with your hand, lift it up and replace it. The process is simpler and
faster than before.
Intelligent structure design shows strength
In terms of the heatsink position of the processor, the DL380p Gen8 is different from the past. The previous generation product has only 18
memory slots on the motherboard, so the rectangular processor heat sink can be placed horizontally, thereby increasing the wind-receiving area
and enhancing the heat dissipation effect. When it comes to DL380p Gen8, its processor and memory are also arranged in the left and right
sides of the chassis, but since the memory slots have increased to 24, the arrangement is more compact, so the placement angle of the processor
radiator has also changed from the original horizontal placement to the front and back arrangement.
内存插槽增加到24个
Smart processor installation slot
The more special part is that the processor installation of this server is designed with new smart slot guidance. The process of installing and
replacing the processor is very different from the past. In the slot design of the processor, the DL380p Gen8 adopts a dual loading rod and adds
an installation module to the processor. There is no need to deliberately compare the installation position. It is very convenient when replacing
and upgrading the processor, and can avoid slot damage caused by incorrect installation position or angle of the processor.
Although this server has 4 PCIe × 16 slots built-in on the motherboard, it can be connected to a total of 6 PCIe interface devices.
It can be seen that this server has added more memory slots in the same chassis space, and can also install more PCIe adapter
cards.
Smart slot guided horizontal transfer card
In addition to the processor having such a design, similar designs can be found on the PCIe horizontal adapter card and replaceable network
card module of this server. As long as you rotate two fingers, the fixing screws of the adapter card can be rotated away. Moreover, there are also
diagrams and conspicuous light blue on the adapter card or network module, indicating the position where the fingers should be placed, which
can facilitate the process of pulling and quickly changing the equipment.
In addition to the internal processor installing smart slots and expanded memory capacity, the new generation of iLO 4 has built-in remote control
chip, and its functions also include intelligent resource allocation, agentless program management, and active health system.
Built-in remote control chip iLO 4
The predecessor of smart resource allocation was the SmartStart OS installation software of HP server, which helps users quickly set up and go
online when they first use the server. The agentless management function is a hardware monitoring and alert function that uses the iLO
management engine. It is a management tool independent of the operating system and processor and can be used without additional
installation.
The last active health system can monitor and record the server's hardware and system configuration status. If there are any hardware changes,
iLO will actively detect and record any hardware changes, so as to quickly discover server problems and shorten the time for problem solving.
====================================================================================================================
★ Server cleaning service
★Server cleaning
Server cleaning is the practice of keeping the server free of dirt, dust, stains or traces. The cleaning process itself requires understanding the server
hardware to professionally complete the cleaning work and keep the server in good physical condition. As the fastest and most effective way to
achieve high-quality cleaning results, today’s business establishes alliances with deep cleaning and decontamination of server systems through
commercial cleaning services.
We are committed to providing excellent data center and server cleaning services and excellent customer service. Our practical technical
experience and knowledge in IT and technology products make us the first choice for customers around the country.
Contamination, dust and dirt on the surface of the server or inside the casing leads to clogging of the vents. Inadequate airflow from server
devices can affect their performance and can cause fire threats as well as health and safety issues. Please contact our server and data center
cleaning team for free without obligation quotes or book a free no obligation survey with us.
★ Server cleaning service
In most cases, server freezing or hardware failure is caused by overheating of the device itself. If the computer equipment is not regularly
cleaned or stored in a decontaminated environment, the computer equipment will significantly overheat. Server fans and vents play an important
role in keeping the equipment cool and healthy. The fan cools the air through the vents, maintains reasonable temperatures of internal
components (such as motherboards, CPUs, hard disks, etc.) and prevents overheating. Traditional vacuum cleaners cannot achieve proper
accessibility with hidden corners, holes and vents in the server. Internal and external cleaning of servers requires special equipment and skills.
Our computer cleaning service experts have extensive experience and knowledge to clean servers and technical facilities to high standards
without affecting the real-time data environment and dangers.
★Cleaning Service
Your IT infrastructure is at the heart of your business’ revenue generation. Cleaning services will add value to your business reliability and growth.
According to your server room cleaning requirements, we can provide customized cleaning services:
+Internal cleaning of server hardware
+ Server hardware surface and external cleaning
+ Server cabinet and rack cleaning
+ Server hosting facilities and room cleaning
In some cases, it is best to remove the contaminated server from the cleaning environment and clean it elsewhere in the proper location (on-site
or off-site) to avoid contaminating existing cleaning equipment. Our cleaning staff at various bases across the country can use special rescue
and tools to accomplish these tasks that require professional and responsible.
★Service Standards
We maintain a high standard and reputation for IT cleaning services. Customer satisfaction and service quality are two key factors in our success.
We reach or exceed ISO 14644-1 when cleaning servers or hosting facilities. We also provide customized services as needed.
★Cleaning plan
We treat each customer separately as they ask. Depending on your special needs, we can provide you with the best cleaning plan for your
equipment room.
+ Regular/Daily Cleaning
+ Clean once
+Quarterly cleaning
+ Clean every 6 months
+ Annual Cleaning
★Location and operation
Our cleaning team operates nationwide. If you have any questions, please call our national free service number 400-160-6690 for information
related matters.
Server dust removal:
Some indicators involved in server dust removal:
Server (online cleaning)-----Deep dust removal process and process:
Before dust removal of the server, update or clean the line:
For all servers and other equipment, first organize the power cords, network and other lengths. Note: During online cleaning, since you need to
move the server, all server connection cables should pay attention to the length. Network jumpers and power cords that are not long enough
must be cooperated with Party A's network manager to replace or update the length of the cable before cleaning.
② Displacement from the server rail:
When each server pulls the server from the rails on the cabinet, it is smooth until the cover plate at the top of the server can be opened. Note:
Everyone should wear 3M electrician gloves to prevent static electricity and anti-slip, causing damage to the server.
③Online cleaning of server:
When opening the cover zipper of the server, first wipe the dust from the server cover (to prevent the dust from the server cover from falling into
the server). Cleaning personnel must change their belts (white anti-static gloves) and anti-static bracelets. Be careful not to touch the chips of the
motherboard and related boards to avoid electrostatic breakdown of the chip. First use an electrostatic elimination instrument and an air
compressor to clean the main dust, and then use a hand-held vacuum cleaner to clean the dust. Use an anti-static brush to remove the remaining
dust from the motherboard. Note: Do not use cleaning spray to remove dust on the motherboard directly.
④ Clean server and other accessories online:
Drain fan cleaning:
The diversion fans are generally 6 sets. First, use an anti-static brush to initially clean the fan surface. The fan blades of the fan are sprayed with a
special cleaning spray for the server, and use a special long-handled brush to clean the fan blades.
l+Array Card Cleaning: Use an anti-static brush to remove stubborn dust. Then use a hand-held vacuum cleaner to clean the dust. Pay attention
to the battery on the array card and try to use a brush.
+Hard disk cleaning: Do not extract the hard disk when cleaning the hard disk. Only use small anti-static brushes to clean up dust. Then, use a
hand-held vacuum to suck the remaining dust. Finally, use a turbo vacuum cleaner to clean the gap between the hard disk sets. Use static
elimination liquid to eliminate static treatment on the surface of the hard disk rack of the hard disk group.
+Motherboard cleaning: First, use a handheld special vacuum cleaner to clean the dust deposited on the server motherboard, and use a special
anti-static brush to clean the remaining dust. Note: Try not to use cleaning spray to flush the server motherboard. When using a local physical
board, if you need to use a special online cleaning spray, please use it in conjunction with FLUKE's thermal imager and use it with a turbo hair
dryer to prevent the production of condensation or ice crystals.
+Case cover cleaning: Use a special rag and use a special online cleaning solution to clean the chassis cover. Finally, apply anti-static fluid to
eliminate static electricity on the case.
+ Cleaning of server power supply: Use a special anti-static rag and a vacuum cleaner to remove dust on the power surface. For secondary
treatment of rust or stubborn stains, use communication online cleaning solution. The server's power fan is blown by hand-held vacuum cleaner.
Note: Try not to rinse with cleaning spray. The fan blades in the power supply should be cleaned with anti-static brushes.
+CPU fan cleaning: Use a wind blower to clean the CPU fan first, and finally, use an anti-static brush to remove it. Use a hair dryer and blow it
clean.
+ Cleaning of memory stick: Use an anti-static brush to remove dust from the front and back of the memory stick. Clean. Note: Try not to use server spray to clean.
l+ Clean the front windshield of the server: First, use a low-power (500W) vacuum cleaner to initially clean the front windshield of the server,
and then, use a special cleaning spray for the server to clean each mesh hole. Finally, use anti-static fluid and rag to perform anti-static treatment on the surface of the front windshield of the server.
Server (online cleaning)---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: The light dust removal of the server (online cleaning) is different from deep cleaning. It is a dust removal method
that cannot be opened according to Party A's requirements.
Dust removal of server housing:
First use an anti-static vacuum cleaner to absorb dust from the server shell, then use an electrostatic tablecloth, and
use a special server cleaning solution to clean the contaminants in the server shell. Finally, use an electrostatic elimination
solution to eliminate the electricity from the server shell.
② Dust removal on the front panel of the server:
+Hard disk cleaning: Do not extract the hard disk when cleaning the hard disk. Only use small anti-static brushes to clean
up dust. Then, use a hand-held vacuum to suck the remaining dust. Finally, use an anti-static vacuum cleaner to clean the
gap between the hard disk groups. Use static elimination liquid to eliminate static treatment on the surface of the hard
disk rack of the hard disk group. (For empty hard drive racks, be sure to extract them out and clean them.)
③ Dust removal on the server backend:
+ Cleaning of server power supply: Use a special anti-static rag and a vacuum cleaner to remove dust on the power surface.
For secondary treatment of rust or stubborn stains, use communication online cleaning solution. The server's power fan
is blown by hand-held vacuum cleaner. Note: Try not to rinse with cleaning spray. The fan blades in the power supply
should be cleaned with anti-static brushes.
Tower server dust removal
1. HP Tower Server
The position of HP ProLiant series servers in the industry and market. As the best-selling HP new ProLiant ML server on the
market, the HP ProLiant ML350p Gen8 has a wide range of adaptability. It can provide excellent performance, availability
and highest scalability for growth enterprises, enterprise data centers and off-site branches of large enterprises, facing various
types of demanding applications.
====================================================================================
★ Server cleaning service
★Server cleaning
Server cleaning is the practice of keeping the server free of dirt, dust, stains or traces. The cleaning process itself requires understanding the server
hardware to professionally complete the cleaning work and keep the server in good physical condition. As the fastest and most effective way to achieve high-quality cleaning results, today’s business establishes alliances with deep cleaning and decontamination of server systems through commercial cleaning services.
We are committed to providing excellent data center and server cleaning services and excellent customer service. Our practical technical experience and
knowledge in IT and technology products make us the first choice for customers around the country.
Contamination, dust and dirt on the surface of the server or inside the casing leads to clogging of the vents. Inadequate airflow from server devices can affect their performance and can cause fire threats as well as health and safety issues. Please contact
our server and data center cleaning team for free without obligation quotes or book a free no obligation survey with us.
★ Server cleaning service
In most cases, server freezing or hardware failure is caused by overheating of the device itself. If the computer equipment is not regularly cleaned or
stored in a decontaminated environment, the computer equipment will significantly overheat. Server fans and vents play an important role in keeping
the equipment cool and healthy. The fan cools the air through the vents, maintains reasonable temperatures of internal components (such as
motherboards, CPUs, hard disks, etc.) and prevents overheating. Traditional vacuum cleaners cannot achieve proper accessibility with hidden corners,
holes and vents in the server. Internal and external cleaning of servers requires special equipment and skills. Our computer cleaning service experts
have extensive experience and knowledge to clean servers and technical facilities to high standards without affecting the real-time data environment
and dangers.
★Cleaning Service
Your IT infrastructure is at the heart of your business’ revenue generation. Cleaning services will add value to your business reliability and growth.
According to your server room cleaning requirements, we can provide customized cleaning services:
+Internal cleaning of server hardware
+ Server hardware surface and external cleaning
+ Server cabinet and rack cleaning
+ Server hosting facilities and room cleaning
In some cases, it is best to remove the contaminated server from the cleaning environment and clean it elsewhere in the proper location (on-site or
off-site) to avoid contaminating existing cleaning equipment. Our cleaning staff at various bases across the country can use special rescue and tools to accomplish these tasks that require professional and responsible.
★Service Standards
We maintain a high standard and reputation for IT cleaning services. Customer satisfaction and service quality are two key factors in our success.
We reach or exceed ISO 14644-1 when cleaning servers or hosting facilities. We also provide customized services as needed.
★Cleaning plan
We treat each customer separately as they ask. Depending on your special needs, we can provide you with the best cleaning plan for your equipment
room.
+ Regular/Daily Cleaning
+ Clean once
+Quarterly cleaning
+ Clean every 6 months
+ Annual Cleaning
★Location and operation
Our cleaning team operates nationwide. If you have any questions, please call our national free service number 400-160-6690 for information
related matters.
Server dust removal:
Some indicators involved in server dust removal:
Server (online cleaning)-----Deep dust removal process and process:
Before dust removal of the server, update or clean the line:
For all servers and other equipment, first organize the power cords, network and other lengths. Note: During online cleaning, since you need to
move the server, all server connection cables should pay attention to the length. Network jumpers and power cords that are not long enough must
be cooperated with Party A's network manager to replace or update the length of the cable before cleaning.
② Displacement from the server rail:
When each server pulls the server from the rails on the cabinet, it is smooth until the cover plate at the top of the server can be opened. Note:
Everyone should wear 3M electrician gloves to prevent static electricity and anti-slip, causing damage to the server.
③Online cleaning of server:
When opening the cover zipper of the server, first wipe the dust from the server cover (to prevent the dust from the server cover from falling into
the server). Cleaning personnel must change their belts (white anti-static gloves) and anti-static bracelets. Be careful not to touch the chips of the motherboard and related boards to avoid electrostatic breakdown of the chip. First use an electrostatic elimination instrument and an air compressor to clean the main dust, and then use a hand-held vacuum cleaner to clean the dust. Use an anti-static brush to remove the remaining dust from the motherboard. Note: Do not use cleaning spray to remove dust on the motherboard directly.
④ Clean server and other accessories online:
Drain fan cleaning:
The diversion fans are generally 6 sets. First, use an anti-static brush to initially clean the fan surface. The fan blades of the fan are sprayed with a
special cleaning spray for the server, and use a special long-handled brush to clean the fan blades.
l+Array Card Cleaning: Use an anti-static brush to remove stubborn dust. Then use a hand-held vacuum cleaner to clean the dust. Pay attention to
the battery on the array card and try to use a brush.
+Hard disk cleaning: Do not extract the hard disk when cleaning the hard disk. Only use small anti-static brushes to clean up dust. Then, use a
hand-held vacuum to suck the remaining dust. Finally, use a turbo vacuum cleaner to clean the gap between the hard disk sets. Use static
elimination liquid to eliminate static treatment on the surface of the hard disk rack of the hard disk group.
+Motherboard cleaning: First, use a handheld special vacuum cleaner to clean the dust deposited on the server motherboard, and use a special
anti-static brush to clean the remaining dust. Note: Try not to use cleaning spray to flush the server motherboard. When using a local physical
board, if you need to use a special online cleaning spray, please use it in conjunction with FLUKE's thermal imager and use it with a turbo hair dryer
to prevent the production of condensation or ice crystals.
+Case cover cleaning: Use a special rag and use a special online cleaning solution to clean the chassis cover. Finally, apply anti-static fluid to
eliminate static electricity on the case.
+ Cleaning of server power supply: Use a special anti-static rag and a vacuum cleaner to remove dust on the power surface. For secondary
treatment of rust or stubborn stains, use communication online cleaning solution. The server's power fan is blown by hand-held vacuum cleaner.
Note: Try not to rinse with cleaning spray. The fan blades in the power supply should be cleaned with anti-static brushes.
+CPU fan cleaning: Use a wind blower to clean the CPU fan first, and finally, use an anti-static brush to remove it. Use a hair dryer and blow it
clean.
+ Cleaning of memory stick: Use an anti-static brush to remove dust from the front and back of the memory stick. Clean. Note: Try not to use
server spray to clean.
l+ Clean the front windshield of the server: First, use a low-power (500W) vacuum cleaner to initially clean the front windshield of the server,
and then, use a special cleaning spray for the server to clean each mesh hole. Finally, use anti-static fluid and rag to perform anti-static treatment on the surface of the front windshield of the server.
Server (online cleaning)---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: The light dust removal of the server (online cleaning) is different from deep cleaning. It is a dust removal method that cannot be opened
according to Party A's requirements.
Dust removal of server housing:
First use an anti-static vacuum cleaner to absorb dust from the server shell, then use an electrostatic tablecloth, and use a special server
cleaning
solution to clean the contaminants in the server shell. Finally, use an electrostatic elimination solution to eliminate the electricity from the server
shell.
② Dust removal on the front panel of the server:
+Hard disk cleaning: Do not extract the hard disk when cleaning the hard disk. Only use small anti-static brushes to clean up dust. Then, use
a hand-held vacuum to suck the remaining dust. Finally, use an anti-static vacuum cleaner to clean the gap between the hard disk groups. Use
static elimination liquid to eliminate static treatment on the surface of the hard disk rack of the hard disk group. (For empty hard drive racks, be sure to extract them out and clean them.)
③ Dust removal on the server backend:
+ Cleaning of server power supply: Use a special anti-static rag and a vacuum cleaner to remove dust on the power surface. For secondary
treatment of rust or stubborn stains, use communication online cleaning solution. The server's power fan is blown by hand-held vacuum cleaner.
Note: Try not to rinse with cleaning spray. The fan blades in the power supply should be cleaned with anti-static brushes.
请拨打全国免费咨询热线：400-160-6690，联络我们的专业销售人员，其他更多信息，请浏览公司官网（www.cd-estt.com）
(Tel)：+86-028 - 85433824/ 85434834/ 85572715/ 855592596/ 85074844 (Fax)：+86-028- 85572715-8010 / 8011 Copyright © ESTT Tech All Rights Reserved 2008-2025. For more information, please visit the company's official website (www.dyestt.com) 蜀ICP备16017795号
ABOUT 丨 MESSAGE 丨 CONTACT US
MESSAGE
DOWNLOAD
